1. Our chaise lounge is made from steamed beech wood components joined by strong knee-joint rivets.
2. The set is made with cotton material printed in various patterns with a filling of soft fine foam and a rear panel made from impregnated material.
3. The chaise lounge can be arranged into three positions.
4. The dimensions in the extended position are: width – 750mm, length – 850mm, height – 950mm.
5. The dimensions in the folded position are: width – 750mm, length – 1200mm, height – 140mm.
6. TECHNICAL DETAILS
6.1. The frame of the chaise lounge is made from beech wood.
6.2. Before drying, the beech wood components are steam-treated.
6.3. All wooden components have been sanded and varnished.
6.4. The wood stock used in our chaise lounges meet the requirements of the Bulgarian State Standard (BSS).
7. PACKING AND MARKING
7.1. The chaise lounge is packed in a nylon bag.
7.2. The maker’s mark is placed on the lower part of each chaise lounge in permanent paint, containing the following information:
8. SAFE-KEEPING, TRANSPORT AND ACCOMPANYNG DOCUMENTS
8.1. Our chaise lounges are stored in stacks in closed, clean and dry storerooms with wooden floors (or floors with other thermo-isolating materials).
8.2. The chaise lounges must be protected against sunshine, fungus and insect infestations.
8.3. Upon loading, transporting and unloading the chaise lounges must be protected against mechanical damage, dampness and chemical contamination.
8.4. Transport of the chaise lounges is carried out in closed, clean and dry vehicles.